• 软件是一项有趣的公开来源应用,旨在控制与无线的枢纽/路,如ESP8266、ESP32或Raspberry Pi4。 其想法是将音像投入转换成视觉产出,将音乐转变为一个美丽和黑色彩的LED灯片。 光是你们能够连接、获取和控制你的路障的网络接口。

    申请是简单的,但条件是你能够了解如何做生动,以了解方案本身的照明。 谁可以管理已经增加的装置,为新装置作出贡献,并调整现有装置的流动。 更确切地说,该方案对于市场发现的更常见的设备是无用的,特别是因为上述壳在这种市场中至关重要。

    该方案通过你机器无线单元向三个兼容的壳之一发出信号,直接通过无线通信单元与这些信号联系。 如果你出售给你的LED剥夺了正确的方式,那么它本身就应该能够把所收到的信号发送给照灯,并开始为最后和有色彩的图片进行流动。 为了产生预期效果,这一进程已经重复。

  • सॉफ्टवेयर एक दिलचस्प ओपन सोर्स एप्लिकेशन है जो वायरलेस हब / चिप्स जैसे ESP8266, ESP32, या रास्पबेरी पाई 4. से जुड़े एलईडी स्ट्रिप्स को नियंत्रित करने के लिए डिज़ाइन किया गया है। विचार ऑडियो इनपुट को विजुअल आउटपुट में परिवर्तित करना है, संगीत को एक सुंदर और रंगीन एलईडी लाइट शो में परिवर्तित करना है। ऐप स्वयं एक वेब इंटरफ़ेस से अधिक है जहां से आप अपने एलईडी स्ट्रिप्स को कनेक्ट, एक्सेस और नियंत्रित कर सकते हैं।

    एप्लिकेशन को संचालित करने के लिए सरल है, बशर्ते आप यह समझने में कामयाब रहे कि कैसे प्रोग्राम के लिए दिखाई देने वाली रोशनी के लिए भौतिक तारों को किया जाना चाहिए। एक पहले से ही जोड़ा उपकरणों का प्रबंधन कर सकता है, नए लोगों में योगदान कर सकता है और मौजूदा उपकरणों के आंदोलन को समायोजित कर सकता है। किसी भी तरह, कार्यक्रम बाजारों में पाए जाने वाले अधिक सामान्य उपकरणों के लिए बेकार है, खासकर चूंकि उपरोक्त चिप्स इस समीकरण में आवश्यक हैं।

    कार्यक्रम आपके मशीन के वायरलेस मॉड्यूल के माध्यम से तीन संगत चिप्स में से एक की ओर संकेत भेजता है, जो सीधे उनके एकीकृत वायरलेस संचार मॉड्यूल के माध्यम से संवाद करता है। यदि आपने अपनी एलईडी स्ट्रिप को सही तरीके से मिला लिया है, तो चिप खुद को आगे रोशनी के लिए प्राप्त संकेतों को भेजने में सक्षम होना चाहिए और अंतिम और रंगीन प्रकाश शो के लिए अपने आंदोलन को निर्देशित करना शुरू करना चाहिए। इस प्रक्रिया को वांछित प्रभाव बनाने के लिए आवश्यकतानुसार दोहराया जाता है।

  • LedFx is an interesting open-source application designed to control LED strips connected to wireless hub/chips such as the ESP8266, ESP32, or Raspberry Pi 4. The idea is to convert audio input into visual output, transforming music into a beautiful and colorful LED light show. The app itself is more of a web interface from where you can connect, access, and control your LED strips.

    The application is simple to operate, provided you've managed to understand how the physical wiring should be done for the lights to be visible for the program itself. One can manage already added devices, contribute to new ones, and adjust the movement of existing devices. Either way, the program is useless for more common devices found on the markets, especially since the above-mentioned chips are essential in this equation.

    The program sends signals through your machine's wireless module towards one of the three compatible chips, communicating directly with these through their integrated wireless communication module. If you've soldered your LED strip the right way, the chip itself should further be able to send the received signals to the lights and begin directing their movement for a final and colorful light show. This process is repeated as much as needed in order to create the desired effect.