• 有些情况下,当你想把你的显示器进入睡眠状态,但没有做同样的你的电脑。 诚然,这不是你想要经常做的事情,但它可能发生。

    MonitorControl是一个应用程序,可以帮助你和其他一些事情。

    这是一个小程序,为您提供了一些控制你的显monitors。 所有你需要的是一个互联网连接,你是好去。 它创建了一个可以控制显示器的web服务器,您也可以从其他Pc上执行此操作。

    你不必担心别人能够控制你的设备,虽然。 该程序有一个白名单,您可以在其中写下允许使用设备的IP地址。

    UI本身不允许你做太多事情。 你基本上用它来打开web界面,其中所有的命令都位于。

    你有十个选择。 可能有两个将被使用最多,或根本。 第一个是立即关闭显monitor,第二个是在15秒后关闭显monitor。

    通过使用"状态"功能,它会显示显示器是开启还是关闭。 从不同的PC完成时,这是非常有用的,你可以告诉,如果主要的一个正在使用与否。

    与此相关的,你也有"空闲"选项。 当你点击它时,它会显示自上次使用设备以来经过了多少毫秒。

    一个可疑的命令是"备用"命令,它旁边有一个描述,上面写着"可能什么都不做。"为什么有人会打扰创造一些不做任何事情的东西是任何人的猜测。

    该程序可以有它的用途。 如果您的显示器放置在遥不可及的地方,并且您想立即关闭显display,那么它可能很好。 您还可以利用它来检查您的计算机上,当你不在它的前面。

    这不是有史以来最重要的程序,但它确实允许你做一些有趣的事情。

  • ऐसी स्थितियां हैं जब आप अपने मॉनिटर को सोने के लिए रखना चाहते हैं, लेकिन अपने पीसी के लिए ऐसा किए बिना। दी, यह कुछ ऐसा नहीं है जिसे आप अक्सर करना चाहते हैं, लेकिन ऐसा हो सकता है।

    मॉनिटरकंट्रोल एक ऐसा एप्लिकेशन है जो आपकी सहायता कर सकता है और कुछ अन्य चीजें।

    यह एक छोटा कार्यक्रम है जो आपको अपने मॉनिटर पर कुछ नियंत्रण प्रदान करता है। आपको बस एक इंटरनेट कनेक्शन की आवश्यकता है और आप जाने के लिए अच्छे हैं। यह एक वेब सर्वर बनाता है जहां से मॉनिटर को नियंत्रित किया जा सकता है, और आप इसे अन्य पीसी से भी कर पाएंगे।

    हालाँकि आपको अपने डिवाइस को नियंत्रित करने में सक्षम किसी और के बारे में चिंता करने की ज़रूरत नहीं है। कार्यक्रम में एक श्वेतसूची है जहां आप अपने डिवाइस का उपयोग करने की अनुमति देने वाले आईपी पते को लिख सकते हैं।

    यूआई खुद आपको बहुत कुछ करने की अनुमति नहीं देता है। आप मूल रूप से इसका उपयोग वेब इंटरफेस को खोलने के लिए करते हैं, जहां सभी कमांड स्थित हैं।

    वहां आपके पास दस विकल्प हैं। उनमें से शायद दो हैं जो सबसे अधिक उपयोग किए जाएंगे, या बिल्कुल भी। पहला मॉनिटर तुरंत बंद करना होगा, और दूसरा 15 सेकंड के बाद मॉनिटर बंद करना होगा।

    "स्थिति" सुविधा का उपयोग करके, यह आपको दिखाता है कि मॉनिटर चालू है या बंद है। यह एक अलग पीसी से किए जाने पर उपयोगी है, जैसा कि आप बता सकते हैं कि मुख्य एक का उपयोग किया जा रहा है या नहीं।

    इसके संबंध में, आपके पास "निष्क्रिय" विकल्प भी है। जब आप उस पर क्लिक करते हैं, तो यह आपको दिखाता है कि डिवाइस के अंतिम उपयोग के बाद से कितने मिलीसेकंड बीत चुके हैं।

    एक संदिग्ध कमांड "स्टैंडबाय" एक है, जिसका शाब्दिक रूप से इसके आगे एक वर्णन है जो पढ़ता है "शायद कुछ भी नहीं है।" क्यों कोई भी ऐसा कुछ बनाने से परेशान होगा जो कुछ नहीं करता है किसी का अनुमान है।

    कार्यक्रम में इसके उपयोग हो सकते हैं। अगर आपका मॉनीटर कहीं पहुंच से बाहर रखा गया है और आप डिस्प्ले को तुरंत बंद करना चाहते हैं, तो यह अच्छा हो सकता है। जब आप इसके सामने नहीं होते हैं तो आप इसका उपयोग अपने कंप्यूटर पर जांचने के लिए भी कर सकते हैं।

    यह अब तक का सबसे महत्वपूर्ण कार्यक्रम नहीं है, लेकिन यह आपको कुछ दिलचस्प चीजें करने की अनुमति देता है।

  • There are situations when you would like to put your monitor to sleep, but without doing the same to your PC. Granted, it is not something you would want to do all that often, but it can happen.

    MonitorControl is an application that can assist you with that and a few other things.

    This is a small program that offers you some control over your monitors. All you need is an internet connection and you're good to go. It creates a web server from where the monitors can be controlled, and you will be able to do it from other PCs as well.

    You do not need to worry about someone else being able to control your device, though. The program has a whitelist where you can write down the IP addresses that you allow to use your device.

    The UI itself doesn't allow you to do much. You basically use it to open up the web interface, where all the commands are situated.

    There you have ten options. There are probably two of them that will be used the most, or at all. The first one would be to turn off the monitor immediately, and the second one is turning off the monitor after 15 seconds.

    By using the "status" feature, it shows you whether the monitor is on or off. This is useful when done from a different PC, as you can tell if the main one is being used or not.

    In relation to this, you also have the "idle" option. When you click on it, it shows you how many milliseconds passed since the device was last used.

    A questionable command is the "standby" one, which literally has a description next to it that reads "probably does nothing." Why anyone would bother creating something that does not do anything is anyone's guess.

    The program can have its uses. If your monitor is placed somewhere out of reach and you want to turn the display off immediately, then it can be good. You can also utilize it to check on your computer when you are not in front of it.

    It isn't the most important program ever created, but it does allow you to do some interesting things.