• Sixaxis控制器Android应用程序的设计允许索尼Sixaxis,导航,DualShock3和DualShock4控制器与移动设备配对并用于游戏。

    但是,对于要在移动设备上使用的控制器,您需要使用Sixaxis对工具在它们之间建立连接。 这个程序和移动应用程序都需要事先安装。

    首先,您应该通过USB将控制器连接到PC。 然后,启动桌面应用程序并检查顶部是否显示蓝牙地址;这是游戏手柄当前与之配对的设备,并且需要与移动设备进行交换。

    安装Sixaxis控制器Android应用程序后,应显示移动设备的蓝牙地址,您需要在桌面应用程序窗口的空字段中键入此值。 最后,单击更新将控制器与移动设备配对。

    需要注意的是,您的Android手机或平板电脑需要植根才能执行此配对。 此外,某些设备不受支持,因为它们缺乏所需的蓝牙协议。 为了确保您的设备得到支持,您可以安装Sixaxis兼容性检查器Android应用程序。

  • सिक्सैक्सिस कंट्रोलर एंड्रॉइड ऐप को सोनी सिक्सैक्सिस, नेविगेशन, डुअलशॉक 3 और डुअलशॉक 4 नियंत्रकों को मोबाइल डिवाइस के साथ जोड़े जाने और गेमिंग के लिए उपयोग करने की अनुमति देने के लिए डिज़ाइन किया गया था।

    मोबाइल डिवाइस पर उपयोग किए जाने वाले नियंत्रक के लिए, हालांकि, आपको उनके बीच संबंध स्थापित करने के लिए सिक्सैक्सिस पेयर टूल का उपयोग करना होगा। इस कार्यक्रम और मोबाइल ऐप दोनों को पहले से इंस्टॉल करने की आवश्यकता है।

    सबसे पहले, आपको अपने पीसी से नियंत्रक को यूएसबी के माध्यम से कनेक्ट करना चाहिए। फिर, डेस्कटॉप एप्लिकेशन लॉन्च करें और जांचें कि क्या शीर्ष पर एक ब्लूटूथ पता प्रदर्शित होता है; यह वह डिवाइस है जिसे गेमपैड वर्तमान में जोड़ा जाता है, और इसे आपके मोबाइल डिवाइस के साथ स्वैप करना होगा।

    सिक्सैक्सिस कंट्रोलर एंड्रॉइड ऐप को इंस्टॉल करने के बाद, मोबाइल डिवाइस का ब्लूटूथ पता प्रदर्शित किया जाना चाहिए, और आपको डेस्कटॉप एप्लिकेशन विंडो में खाली फ़ील्ड में यह मान टाइप करना होगा। अंत में, अपने मोबाइल डिवाइस के साथ कंट्रोलर को पेयर करने के लिए अपडेट पर क्लिक करें।

    यह नोट करना महत्वपूर्ण है कि आपके Android फोन या टैबलेट को इस जोड़ी के प्रदर्शन के लिए रूट किए जाने की आवश्यकता है। साथ ही, कुछ डिवाइस समर्थित नहीं हैं क्योंकि उनमें आवश्यक ब्लूटूथ प्रोटोकॉल की कमी है। यह सुनिश्चित करने के लिए कि आपका डिवाइस समर्थित है, आप सिक्सैक्सिस कम्पैटिबिलिटी चेकर एंड्रॉइड ऐप इंस्टॉल कर सकते हैं।

  • The Sixaxis Controller Android app was designed to allow Sony Sixaxis, Navigation, DualShock 3 and DualShock 4 controllers to be paired with a mobile device and used for gaming.

    For the controller to be used on a mobile device, however, you need to use the Sixaxis Pair Tool to establish a connection between them. Both this program and the mobile app need to be installed beforehand.

    First of all, you should connect the controller to your PC via USB. Then, launch the desktop application and check if a Bluetooth address is displayed at the top; this is the device that the gamepad is currently paired with, and it needs to be swapped with your mobile device.

    After installing the Sixaxis Controller Android app, the Bluetooth address of the mobile device should be displayed, and you need to type this value into the empty field in the desktop application window. Finally, click Update to pair the controller with your mobile device.

    It is important to note that your Android phone or tablet needs to be rooted for this pairing to be performed. Also, some devices are not supported as they lack the required Bluetooth protocol. To make sure your device is supported, you can install the Sixaxis Compatibility Checker Android app.